  |
| NOVA LINHA DE PRODUTOS (06/01/2009) |
 Continuando a diversificar a nossa gama de produtos, e após a introdução de alguns modelos de helicopteros co-axiais (Promodels) decidimos importar directamente alguns modelos da vasta gama da conhecida fabrica WALKERA, após termos testado, positivamente, o CREATA 400.
Mas não nos quisemos ficar por aqui.
Sabendo dos "puristas" destas belas máquinas voadoras, acordámos também a comercialização dos modelos e up-grades da conceituada firma Americana CNChelicopter, que possui uma vasta gama de up-grades para as mais populares marcas, ESKY, WALKERA, EFLITE, TREX etc.
Aqui ficam alguns exemplos de ambas as marcas.
Ainda durante a 1ª quinzena de Janeiro efectuaremos a 1ª encomenda a estas firmas.
Fiquem atentos ás noticias no nosso site www.vintesete.com e respectiva loja on-line em 27AIR.
Caso necessitem de algum esclarecimento, podem sempre contactar-nos através do mail vintesete@vintesete.com ou telefónicamente
|
| ver mais >>> |
|
| SACO P/ RADIO - HUDY (22/12/2008) |
 Já disponivel. |
|
| T2R PRO / XII / T2 09 / NT1 e XB808 (18/12/2008) |
 Toda a Gama da XRAY encontra-se disponivel para as Prendas de Natal.
Presentei-e-se com uma destas "preciosidades" e tenha um NATAL feliz com a sua montagem.
Boas Festas. |
|
| RADIO FUTABA 4PK (18/12/2008) |
 Já disponivel o Futaba 4PK apenas por 360,00 € |
|
| XRAY T2R PRO TOURING CAR (04/12/2008) |
 A plataforma mais económica do T2 vai estar já disponível para este NATAL
Preço: 242,39 € |
|
| SACOS HUDY P/CAIXA ARRANCADORA (04/12/2008) |
 Uma bonita prenda de NATAL, este prático saco da HUDY para a Caixa de Arranque.
Preço: 35,00 € |
| ver mais >>> |
|
| CARREGADORES YES (28/11/2008) |
 A nova linha de carregadores YES encontra-se já disponivel, com os modelos:
Y-003-EU YES I-PEAK 4500 (AC/DC) EU - 57,50€
Y-020 YES I-PEAK 545 - 90,00€
Y-022 YES I-PEAK 545 DUAL - 160,00€
Y-024 YES I-PEAK 867 - 185,00€
Todas as especificações técnicas podem ser visualizadas no PDF em anexo |
| |
| Anexo 1 |
| ver mais >>> |
|
| KART 1/10 RTR 27Mhz (28/11/2008) |
 NOVIDADE
Kart 1/10 pronto a andar com um ar muito realista (Piloto vendido á parte)
200,00€ |
|
| KITS HPI (26/11/2008) |
CAMPANHA DE NATAL:
STOCK LIMITADO:
SAVAGE XL 5,9cc RTR SAVAGE X 4,6cc
RTR HELLFIRE 4X4 4,6cc
RTR NITRO RS4 3 EVO RTR TOUREZA NITRO
RS4 3 EVO RTR VENON |
| ver mais >>> |
|
| SERRA-CABOS ALU. P/T2 (24/11/2008) |
 Estes serra-cabos evitam folgas nas barras estabilizadoras, melhorando assim o desempenho das mesmas. |
| ver mais >>> |
|
| HELICOPTERO BELL 47G RTF (21/11/2008) |
 HELIXX BELL 47G RTF 35 MHZ MODE 2 (EURO VERSION)
Campanha de Natal 90,00 € |
|
| ROBOCOPTER (21/11/2008) |
 Robocopter, com um radio de 2,4Ghz, facilimo de voar.
Campanha de NATAL 35 €
Faça já a sua encomenda e voe facilmente dentro de casa. |
|
| YADA ST RTR (21/11/2008) |
 Finalmente um 1/8 Todo-o-Terreno RTR. Na Bélgica este carro corre no Campeonato Nacional, trocando apenas o Motor. Preço qualidade imbativel.
Campanha de Natal 300,00€ |
|
| MOTO PLANADOR (21/11/2008) |
 SKYRAIDER RTF 35MHZ MODE 2
Campanha de Natal 117,50 € |
|
| HELICOPTERO (21/11/2008) |
 HELIXX 3D RTF 35 MHZ MODE 2 (EURO VERSION)
Campanha de Natal 90,00 €
|
|
| HELICOPTERO LONG RANGER (21/11/2008) |
 HELIXX LONG RANGER RTF 35 MHZ MODE 2 (EURO VERSION)
Campanha de Natal 90,00 €
|
|
|
| INFORMAÇÃO SOBRE XB808 (14/11/2008) |
Os novos kits XB808 já vêm com:
- Novo Depósito Combustivel
- Novas Caixas de Diff. Reforçadas
- Novos Rolamentos para Caixa do Diff.
- Espaçador dos Rolamentos atrás referidos
Os Kits já se encontram disponiveis. |
| |
| Anexo 1 |
|
| XRAY 1/12 PAN CAR (13/11/2008) |
 Ora cá está mais uma Novidade para a nossa Pista de Indoor.
Este Inverno promete.....
E depois da sua brilhante prestação no WC no passado fim de semana, o carro é esperado para o NATAL, o seu custo será de 230,00€
Podem desde já fazer as vossas reservas, uma vez que a 1ª. remessa, segundo nos informaram, é limitada. |
| ver mais >>> |
|
| SACO XRAY (07/11/2008) |
 Já disponivel. |
| |
| Anexo 1 |
|
| XRAY T2 09 (31/10/2008) |
 "....XRAY T2’009
It’s all in the details.
XRAY has been viewed as the highest quality touring car available since it entered the RC car
scene in 2000. Now with a long and distinguished history of racing achievements and groundbreaking,
award-winning innovations, XRAY is proud to now offers the T2’009… the most
advanced RC touring car on the market today… a top-quality “no-compromise” engineering
marvel designed to put you in the winners circle..."
Está desvendado o segredo para 2009.
Usando a plataforma do T2 08, o 09 tem alguns melhoramentos, e muita cósmetica.
O PDF em anexo tem a informação completa e as Fotos que pode ver no seguimento da noticia são significativas.
Podem, também, fazer desde já as vossas reservas. |
| |
| Anexo 1 |
| ver mais >>> |
|
| FONTE DE ALIMENTAÇÃO XCEED (11/09/2008) |
 Já anteriormente anunciado, temos agora a informação do seu lançamento para finais deste mês.
PVP. 150,00€
Mais informações e encomendas através vintesete@vintesete.com |
|
| Campanula em Aluminio NT1 (25/07/2008) |
 |
|
| STANDS HUDY P/NT1 E XB808 (11/07/2008) |
 |
|
| ADRENALINE RTR (09/07/2008) |
Barco RTR com motor de 26cc, pronto a navegar.
PVP 670,00€ |
| ver mais >>> |
|
| UNLIMITED RTR 26cc (09/07/2008) |
 Barco Navicraft Unlimited c/motor de 26cc.
Pronto a navegar.
PVP 670,00€ |
| ver mais >>> |
|
| New NT1 Soft Anti-roll Bars (26/06/2008) |
 o 0.7mm SOFT anti-roll bar blades for NT1
o CNC-machined from world-renowned HUDY Spring Steel
o Hand ground for maximum precision
o Softer characteristics than the stock roll bar
332441 Anti-Roll Bar Front Female 0.7mm - Hudy Spring Steel™
Female front SOFT anti-roll bar blade 0.7mm for NT1 is CNC-machined from world-renowned HUDY Spring Steel™. Use with #332451 male front anti-roll bar blade 0.7mm.
332451 Anti-Roll Bar Front Male 0.7mm - Hudy Spring Steel™
Male front SOFT anti-roll bar blade 0.7mm for NT1 is CNC-machined from world-renowned HUDY Spring Steel™. Use with #332441 female front anti-roll bar blade 0.7mm.
333431 Anti-Roll Bar Rear Male 0.7mm - Hudy Spring Steel™
Male rear SOFT anti-roll bar blade 0.7mm CNC-machined from world-renowned HUDY Spring Steel™. Fits #333401 adjustable rear anti-roll bar set. Not interchangeable with #332450 male front anti-roll bar.
|
|
| New XB808 Center Diff Spur Gears (26/06/2008) |
 o Large bevel gears for XB808 center differential
o Machined from special HUDY steel material
o Additionally hardened and precision ground
o Individually machined on a precision German gear machine
o Every gear is individually tested, inspected, and run in
o Laser engraved for easy and instant recognition
355053 Center Diff Spur Gear 43T
355055 Center Diff Spur Gear 41T
Large bevel gears for center differential are machined from special HUDY steel material which has been specially developed for gear-type products, additionally hardened and precision ground to fit the tightest tolerance requirements for perfect fit with the diff outdrives.
The gears are individually machined on a precision German gear machine and every gear is individually tested, inspected, and run in. The diff gears are then laser engraved for easy and instant recognition.
Our special heat treatment makes the gear very hard and strong not only on the surface but also in the core, thus give the gear an extraordinarily-long lifespan with very low wear comparing to standard gears.
|
|
| New HUDY Bearing Greases (24/06/2008) |
 Novidades lançadas agora pela XRAY |
| ver mais >>> |
|
| New XB808 Alu Steering Blocks (24/06/2008) |
 o Authentic XRAY alu steering blocks for XB808
o CNC-machined from premium Swiss 7075 T6 aluminum
o Hardcoated for extra durability and long life
o Ultra-strong construction for extreme racing conditions
o Composite bushings to secure ball-bearings
o Perfect fitment and smooth operation
o Precision machined at state of the art German CNC milling machines
o Laser-engraved with the XRAY registered logo for authenticity
|
| ver mais >>> |
|
| RADIOS FUTABA (20/06/2008) |
APROVEITE OS NOVOS PREÇOS
PODEM SER ADQUIRIDOS NA N/LOJA ONLINE |
| ver mais >>> |
|
| OPCIONAIS XB808 (12/06/2008) |
VER DOC. PDF. |
| |
| Anexo 1 |
|
| MALAS DE FERRAMENTA HUDY (11/06/2008) |
A HUDY acaba de informar da disponibilidade das Malas para Ferramenta.
Aceitam-se, desde já, encomendas para este Produto. |
| ver mais >>> |
|
| BARRAS ESTABILIZADORAS XB808 (11/06/2008) |
Estão já disponiveis as barras estabilizadores para o modelo XB808. |
| ver mais >>> |
|
| XB808 Alu Caster Blocks 10° (09/06/2008) |
 o Authentic XRAY optional alu caster blocks
o Available in different caster angle for ultra-fine geometry adjustment
o CNC-machined from premium Swiss 7075 T6 aluminum
o Super lighweight design yet ultra-strong construction
o Lighter than composite caster block!
o High-quality hardcoating for extra durability and long life
o Includes composite bushings for precise & wobble-free movement
o Laser-engraved with the XRAY registered logo for authenticity
o Caster angle and L/R laser engraved
|
| ver mais >>> |
|
| MOLAS P/ XB 808 (06/06/2008) |
 Já estão disponiveis todas as molas para o XB808. |
|
| #352573 XB808 Alu Steering Plate Swiss 7075 T6 (3mm) - Hardcoated (23/05/2008) |
Authentic XRAY alu steering plate for XB808 is CNC-machined from 3mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Lightweight, ultra-rigid design for unsurpassed strength. Laser-engraved with the XRAY registered logo for authenticity.
Features an additional middle Ackermann setting position for even more precise and smoother Ackermann steering setup.
Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time.
o Authentic XRAY optional alu steering plate for XB808
o Features an additional middle Ackermann setting position
o More precise and smoother Ackermann steering setup
o CNC-machined from 3mm thick premium Swiss 7075 T6 aluminum
o High-quality hardcoating for extra durability and long life
o Ultra-strong construction for extreme racing conditions
o Precision machined at state of the art German CNC milling machines
o Laser-engraved with the XRAY registered logo for authenticity
|
| ver mais >>> |
|
| #352087 XB808 Front Alu Brace Swiss 7075 T6 (5mm) – Hardcoated (21/05/2008) |
 #352087 XB808 Front Alu Brace Swiss 7075 T6 (5mm) – Hardcoated
o Authentic XRAY alu front chassis brace for XB808
o Reinforces chassis rigidity in longitudinal direction
o CNC-machined from 5mm thick premium Swiss 7075 T6 aluminum
o High-quality hardcoating for extra durability and long life
o Ultra-strong construction for long life and durability
o Precision machined with highest tolerances
o Laser-engraved with the XRAY registered logo for authenticity
Authentic XRAY front alu brace for XB808 is CNC-machined from 5mm thick premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-rigid design and unsurpassed strength. Laser-engraved with the XRAY registered logo for authenticity.
Reinforces chassis rigidity in longitudinal direction, helping to stabilize the front suspension when the front of the car is too sensitive.
Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time.
|
| ver mais >>> |
|
| OPCIONAIS PARA O XB808 - Torres de Aluminio (19/05/2008) |
 #352093 XB808 Front Alu Shock Tower Swiss 7075 T6 (3mm) – Hardcoated
BULLETS
o Authentic XRAY alu front shock tower
o CNC-machined from 3mm premium Swiss 7075 T6 aluminum
o High-quality hardcoating for extra durability and long life
o Ultra-rigid design for unsurpassed strength
o Multiple shock mounting locations
o Rigorously tested in virtual and live conditions at EU and US-style tracks
o Precision machined with highest tolerances
o Laser-engraved with the XRAY registered logo for authenticity
|
| ver mais >>> |
|
| DISTRIBUIÇÃO GRP (16/05/2008) |
Já em stock os motores GRP
Os nossos preços já se encontram na Loja On-Line Vintesete em GRP
|
|
| #352303 XB808 Alu Front Lower Susp. Holders Set - Swiss 7075 T6 (7mm) – Hardcoated (14/05/2008) |
 o Authentic XRAY alu front lower suspension holder set
o CNC-machined from 7mm premium Swiss 7075 T6 aluminum
o High-quality hardcoating for extra durability and long life
o Ultra-strong construction for long life and durability
o I.S.S. adjustable settings: front roll center, kick-up
o Heavy-duty, heat-treated suspension pins
o Precision machined with highest tolerances
o Laser-engraved with the XRAY registered logo for authenticity
o Available as set or separately
Authentic XRAY set of alu front lower suspension holders for XB808, CNC-machined from 7mm premium Swiss 7075 T6 aluminum, hardcoated for extra durability and long life. Ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Includes all parts necessary for complete front suspension holder system upgrade.
XRAY I.S.S. (Integrated Suspension Settings) gives adjustable front roll center geometry in a range of 2mm (-1mm, 0mm, +1mm), and new reinforced bushings (included) have 1° and 0.5° eccentricity for front kick-up adjustment. Super-fine adjustments can be made by increments of 0.5°. Includes heavy-duty suspension pivot pins that have been heat treated for increased strength.
Precision machined with highest tolerances using premium fully-automatic German CNC-machines. High-quality hardcoating is done at XRAY’s own in-house fully-robotic hardcoating line, ensuring a perfect hardcoated surface every time. Laser-engraved with the XRAY registered logo for authenticity.
Individual parts of the suspension holder set are also available separately as spare parts.
|
| ver mais >>> |
|
| OPCIONAIS PARA O XB808 (12/05/2008) |
 As Bancadas de aluminio para o XB808 estarão disponiveis para a proxima semana. |
| ver mais >>> |
|
| TRANSPONDER PESSOAL P/M18 (09/05/2008) |
 Já disponivel o transponder pessoal p/M18, sistema Robitronics, que passará a ser usado na n/pista indoor.
PVP 25,00€ |
|
| DICA PARA MONTAGEM DO DIFERENCIAL DO XB808 (18/04/2008) |
Em anexo um documento PDF sobre a Montagem do Diferencial do novo XB808.
Esperamos que seja útil. |
| |
| Anexo 1 |
|
| (08/04/2008) |
 |
|
| TRUGGY XRAY XT8 (27/03/2008) |
 Esta "Máquina" não sobreu qualquer alteração para a época de 2008.
O Preço é imbativel, nova remessa a caminho, façam já as vossas pré encomendas.
PVP 503.19€ |
|
| MASSAS E ÓLEOS LUBRIFICANTES HUDY E + (12/03/2008) |
 Já se encontram disponiveis as massas e óleos lubrificantes Hudy / Xray.
Por favor ver PDF para descrição de produtos |
| |
| Anexo 1 |
|
