Novidades

#353490 XB808 Rear Anti-Roll Bar 3.0mm

Escrito por Sousa | 26 Abril 2010

#353490 XB808 Rear Anti-Roll Bar 3.0mm

  •  3.0mm rear anti-roll bar
  • For fine-tuning suspension setup
  • In-house manufacturing
  • Premium heat-treated spring steel wire

Rear anti-roll bar for XB808, 3.0mm thick. Without any laser-engraved lines for easy identification.
Anti-roll bar wires of different thickness are optionally available for fine-tuning the setup of your XB808. XRAY anti-roll bars are manually manufactured in-house from premium heat-treated spring steel wire using precision bending machines that ensure equal side angles. Manually measured, selected, and straightened to eliminate all tweak.

HUDY Caps for V2 Exclusive Series Handles

Escrito por Sousa | 26 Abril 2010

Continuar...

Set of caps for Hudy V2 wrenches

  • Press fit into the handle ends
  • Instant identification of wrenches
  • 6 same-colored caps in a set
  • Available also for 14mm, 18mm and 22mm handles
  • Sets are available in different colors: black, violet, red, blue.

Set of caps for 14mm, 18mm or 22mm new Hudy wrenches that are marked as V2. Caps are press fit into the handle ends, allowing for instant identification of your wrenches. Great add-on for all new V2 Hudy wrenches.  6 same-colored caps in a set. Sets are available in different colors: black, violet, red, blue.

 #195054-B Cap for Hudy Tool - Handle o 14 - Blue (6)

#195054-K Cap for Hudy Tool - Handle o 14 - Black (6)

#195054-R Cap for Hudy Tool - Handle o 14 - Red (6)

#195054-V Cap for Hudy Tool - Handle o 14 - Violet (6)

#195058-B Cap for Hudy Tool - Handle o 18 - Blue (6)

#195058-K Cap for Hudy Tool - Handle o 18 - Black (6)

#195058-R Cap for Hudy Tool - Handle o 18 - Red (6)

#195058-V Cap for Hudy Tool - Handle o 18 - Violet (6)

#195062-B Cap for Hudy Tool - Handle o 22 - Blue (6)

#195062-K Cap for Hudy Tool - Handle o 22 - Black (6)

#195062-R Cap for Hudy Tool - Handle o 22 - Red (6)

#195062-V Cap for Hudy Tool - Handle o 22 - Violet (6)

Troféu XRAY ON ROAD

Escrito por Sousa | 24 Abril 2010

Devido á fraca aderência e consequente FALTA de INSCRIçÔES a Prova prevista para este fim de semana foi CANCELADA.

Próxima Prova 30 de Maio.

TROFÉU XRAY ON ROAD - SINTRA

Escrito por Sousa | 21 Abril 2010

Aguardamos as vossas inscrições para o Troféu, quer na categoria de 1/10 EP quer GP e 1/8 se houver numero de inscritos que o justifique.

Inscrições abertas até 6ª.Feira ás 19H

Prevê-se Bom Tempo

New 64P Offset Spur Gears

Escrito por Sousa | 19 Abril 2010

  • Precision-molded 64-pitch offset spur gears
  • Strategically lightened to reduce rotating mass
  • Made from special hard composite material
  • Fits 1/10 touring cars

 XRAY presents new additions to the range of precision-molded 64-pitch offset spur gears made from special hard composite material, strategically lightened to reduce rotating mass without compromising strength or durability.   The addition of new 92T, 96T, and 100T gears allows you to further fine-tune your car's performance.  With these original XRAY spur gears, you can race with confidence.

 #305862 Composite Offset Spur Gear 92T / 64P

#305866 Composite Offset Spur Gear 96T / 64P

#305870 Composite Offset Spur Gear 100T / 64P

Mais artigos...

Já disponível

side_808